Archive for New Air Intake Systems

Airaid 310-132

April 12, 2012 / / Comments Off

Airaid 310-132 MXP Intake System
2012 Jeep Wrangler 3.6L Pentastar

8 Horsepower gain
12 Torque gain

•    Double Hump Hose offers increased flex
•    Improved filtering
•    Airtight box protects from dirt and weather
•    Washable and reusable
•    Aftermarket snorkel adaptability

Everyone cares about clean air these days, don’t they? So does your engine! Take a look at the cold air intake filter Airaid has produced for the 2012 Jeep Wrangler. You will be glad you selected a filter that not only has great style but optimum performance.

Studies show that a dirty filter can rob you of almost 7 HP. replace yours today with a premium Airaid 310-132 MXP Intake System filter and enjoy more power, performance and flexibility.

Made in the USA and backed by AIRAID‘s no-hassle warranty. Order yours today!

Not C.A.R.B. approved

Technorati Tags: , , , , , ,

Category: New Air Intake Systems, Uncategorized / Tags: , , , , , ,

Airaid 720-128 Premium Air Filter

February 2, 2012 / / Comments Off


Airaid’s Premium grade air filters are hand built using the finest filter materials available. Airaid begins with multiple layers of cotton gauze and combines them with their own exclusive filtration technology to create a world-class filter.

The filter body is made from hand-poured urethane that will not crack or shrink in the harsh, high heat environment usually found under the hood.

Every one of Airaid’s filters is washable and reusable and will literally last for the life of your vehicle. And each one is covered by Airaid’s exclusive “no hassle” warranty.

Conical, 3.375″ long
9″ x 4.5″ top, 11.5″ x 5″ bottom
4.375″ diameter offset inlet

Technorati Tags: , , , , ,

Category: Air and Fuel, New Air Intake Systems, New Air Tube Covers, New Performance Parts / Tags: , , , , ,

Add 11.62 HP to 6.0L Suburban & Yukon Engines With K&N’s 63-3063 AirCharger Intake

April 17, 2007 / / No comments

K&N 63-3063 K&N Engineering has released an AirCharger Air Intake System (K&N 63-3063) for the 2007 GMC Yukon XL 2500 6.0L V8 engine and the 2007 Chevrolet Suburban 2500 6.0L V8 engine.

“These are big cars with 6 liter engines,” said K&N Performance Kit Manager Bert Heck. “We wanted to build an intake kit that helps this engine with additional horsepower. Our dynamometer testing shows a horse power gain of 11.62 @ 5075 RPM.”

K&N’s 63-3063 rotationally molded polyethylene intake kit uses a large chrome top K&N Air Filter (K&N RF-1042). “Our K&N Air Intake System replaces the restrictive stock air filter. The included heat shield isolates the filter element from the heat of the engine,” said Heck. “This results in cooler air going into the engine resulting in more power.”

It takes less than 90 minutes to install most K&N air intakes with simple hand tools. K&N air intakes come with the famous K&N Million Mile Warranty.

K&N 63-3063 AIRCHARGER AIR INTAKE SYSTEM

For more information, including other K&N products, visit the K&N page at performanceparts.com.

Technorati Tags: , , , , , , , , , , , , , , ,

Category: New Air Intake Systems, New Performance Parts / Tags: , , , , , , , , , , , , , , ,

Raw Power For Big-Block Chevys With Edelbrock’s New 20654 RPM Dual-Quad Air-Gap Intake Manifold

April 9, 2007 / / No comments

Featuring the all-new RPM Air-Gap Dual-Quad intake manifold from Edelbrock – welcome to more horsepower and torque for your big-block Chevy!

Now, it’s easier than ever to update your vehicle’s induction system to a dual quad set-up with these manifold and carburetor kits from Edelbrock. No more choosing different parts, hoping the’ll work together. You get a perfectly matched combination of carburetor and manifold packed into one box. They sparkle in Edelbrock’s ultra-bright “Endurashine” finish. Every kit is complete and bolt-on ready, including two Edelbrock 500cfm Thunder Series AVS carburetors (one manual choke, one electric choke), an Edelbrock RPM Air Gap dual quad intake manifold, Edelbrock’s high tech progressive linkage, a Russell fuel line, a high quality Edelbrock gasket set, and a carburetor stud kit.

EDELBROCK 20654 RPM AIR GAP INTAKE MANIFOLD

For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.

Technorati Tags: , , , , , , , , , , , , , , , , , , , ,

Category: New Air Intake Systems, New Carburetor Service Parts, New Performance Parts / Tags: , , , , , , , , , , , , , , , , , , , ,

Airaid’s New 300-209 Cold Air Intake For The 2007 Dodge 6.7L Cummins Diesel

March 16, 2007 / / No comments

Airaid 300-209 Cold Air Intake SystemCummins, a legend among diesels, tough as nails, and willing to work overtime, the renowned 6.7L Cummins Turbo Diesel churns out a mighty 350 Horsepower and 650 lb-ft of torque, and features a class-exclusive factory-installed exhaust brake option. This beast provides 16,500 pounds of towing capacity without even breaking a sweat!

Since no pickup truck can have too much power, AIRAID Filter Company has unlocked some of the Ram’s “hidden” horsepower and torque with the development of an all-new Cold Air Intake System for the 6.7-liter Cummins Turbo Diesel (P/N 300-209).

AIRAID’s newest system features a Hi-Flow Inlet Tube which retains the factory mass air flow sensor and air intake temperature sensors while significantly improving air flow. In addition, the heart of the system is a washable and reusable AIRAID Premium Filter with SynthaFlow® Technology which has an optimized pleat depth and pleat count
for maximum flow and ultimate filtration, filtering out dirt down to 2 microns!

On the dyno, the new Dodge Diesel System generated an additional +15 rear wheel horsepower and additional 16 lb-ft of torque. Best of all, the system installs in minutes with ordinary hand tools.

AIRAID 300-209 COLD AIR INTAKE SYSTEM

For more information, including other Airaid products, visit the Airaid page at performanceparts.com.

Technorati Tags: , , , , , , , , , , , , , , ,

Category: New Air Intake Systems, New Performance Parts / Tags: , , , , , , , , , , , , , , ,

Add 7.41 Horsepower To Your 2005-2006 Ford F150 V6 With K&N 63-2572 AirCharger Intake System!

March 14, 2007 / / No comments

K&N 63-2572 AirCharger Intake SystemThe Ford F150 is the go-to choice for many consumers. For business or commercial needs, the popular truck is a reliable workhorse. Others see it as pickup that can handle every day driving as easily as it tows and hauls. In fact, the F-150 has been one of the most popular vehicles sold in the United States for nearly every year of the past three decades.

K&N Engineering has developed a 63-Series AirCharger Air Intake System (63-2572) for the 2005 and 2006 Ford F150 4.2 liter V6 engine. K&N dynamometer tests show a horsepower gain of 7.41 @ 4106 rpm.

“The K&N AirCharger Intake System replaces the factory intake tube and air box,” said K&N Performance Kit Manger Bert Heck.  “We use an aerodynamic tube and heat shield with an over-sized K&N Air Filter.  Our Air Intake System is easy to mount because we used available factory mounting points.  The large K&N air filter and the tube’s aerodynamic design contributed heavily to the 7.41 horsepower gain.”

K&N 63-2572 AIR CHARGER INTAKE SYSTEM

For more information, including other K&N products, visit the K&N page at performanceparts.com.

Technorati Tags: , , , , , , , , , ,

Category: New Air Intake Systems, New Performance Parts / Tags: , , , , , , , , , ,

2006 Corvette Z06 Makes 27.22 More Horsepower With K&N Air Intake System 63-3060!

March 9, 2007 / / No comments

K&N 63-3060 Air Intake SystemThe Chevrolet Corvette Z06 that served as the Daytona 500 pace car is mechanically identical to those available at dealerships. It is also the fastest vehicle ever offered by Chevrolet and General Motors. Drivers can go from 0-60 mph in 3.7 seconds with its 7.0 liter all aluminum racing inspired 505 horsepower engine. The Corvette’s top speed is 198 mph.

K&N Engineering, Inc. developed a 63 Series Air Charger Intake System (63-3060) for the 2006 Chevrolet Corvette Z06 7.0 liter V8 engine.

K&N dynamometer tests show a horsepower gain of 27.22 horsepower @ 5600 RPM on this super car. A Z06 is the closest experience many will have to the experience of sitting in a race car. The 63-3060’s aerodynamically engineered tube allows for more air to flow into the engine.

“The design of the K&N Air Charger Intake System had to meet and exceed the demands of a motor that makes 500 horsepower,” said K&N Performance Kit Manager Bert Heck. “In order to do this the K&N Air Filter included in this intake system is made from carbon fiber and very large. We also put an air foil in the large intake tube to provide extra strength and to help streamline the incoming air once it passes through the K&N Air Filter. Our K&N Air Intake System provides less restriction which results in more power.”

It takes less than 90 minutes to install most K&N Air Intake Systems with common tools.

K&N 63-3060 AIR INTAKE SYSTEM

For more information, including other K&N products, visit the K&N page at performanceparts.com.

Technorati Tags: , , , , , , , , , , , , , , , ,

Category: New Air Intake Systems, New Performance Parts / Tags: , , , , , , , , , , , , , , , ,

Instant Horsepower With Airaid’s New Cold Air Intake System 400-203 For The 2005-2006 Ford Super Duty

March 8, 2007 / / No comments

Airaid 400-203 Cold Air Intake SystemSuppose you could boost the horsepower and torque from your 2005-2007 Ford Super Duty 6.8L V-10 with one simple, bolt-on system? AIRAID can make that happen with their all-new air intake for the Ford Super Duty V-10 equipped trucks. Patterned after AIRAID’s new 7.3L Power Stroke system, the new Super Duty V-10 system features a computer-designed mass air flow adaptor with a built in velocity cone, made from durable cross-linked, high-density polyethylene, that delivers maximum air flow to the engine.

The system also incorporates a newly designed washable and reusable AIRAID Premium Air Filter for maximum air flow and filtration. On the Mustang Dyno, this new Ford Super Duty V-10 system generated an additional 13 rear wheel horsepower and an additional 33 lb-ft of torque. Best of all, the system installs in minutes with ordinary hand tools and comes with specially-blended gauze layers combined with a SynthaFlow® dry synthetic layer that consistently filters down to two microns. All AIRAID Filters are made from hand-poured urethane to prevent cracking and shrinkage in the extreme conditions found under the hood on most heavy duty trucks.

AIRAID 400-203 COLD AIR INTAKE SYSTEM

For more information, including other Airaid products, visit the Airaid page at performanceparts.com.

Technorati Tags: , , , , , , , , , , , , , , , , ,

Category: New Air Intake Systems, New Performance Parts / Tags: , , , , , , , , , , , , , , , , ,

Add 24 Horsepower To Ford F-250 Super Duty With K&N 63-2570 AirCharger Air Intake!

February 13, 2007 / / No comments

K&N''s 63-2570 AirCharger IntakeFord’s F-250 Super Duty pickup trucks are built on a separate platform from the light-duty F-150. The larger pickup trucks are typically the vehicle of choice for heavy-duty hauling and towing. K&N Engineering, Inc. has made a 63 Series Air Intake System (K&N 63-2570) for the 2005, 2006 Ford F250 Super Duty 5.4 liter V8 engine. K&N dyno test show a horsepower gain of 24.48 @ 4387 RPM.

“The factory intake tube and factory air box were restrictive,” said K&N Performance Kit Manager Bert Heck. “We gained so much horsepower by removing the stock intake tube and replacing it with the K&N custom engineered air intake tube along with relocating the mass air sensor.”

K&N 63-2570’s rotationally molded polyethylene Air Intake System uses a large 9 inch tall chrome topped K&N Universal Air Filter (K&N RC-5046). The air intake replaces the restrictive stock air filter as the heat shield isolates the filter element from the heat of the engine. This results with cooler air going into the engine.

K&N’s 63-2570 AirCharger Intake

For more information, including other K&N products, visit the K&N page at performanceparts.com.

Technorati Tags: , , , , , , , , ,

Category: New Air Intake Systems, New Performance Parts / Tags: , , , , , , , , ,

AIRAID 400-194 “More Muscle” For 2005-2007 Ford Ranger

February 5, 2007 / / No comments

QuickFit(TM) Cool Air Intake SystemSince its introduction in 1983, the Ford Ranger has been one of the best selling compact pickups in America. With a reputation of being the Ford Tough “little brother” of the F-150, the Ranger is offered with a wide variety of power plants for 2005-2007. At the top of that list is the 4.0-liter V6 rated at 207 horsepower and 238lb/ft of torque. While the 4.0-liter V6 performs well, AIRAID Filter Company has managed to unleash additional horsepower, torque and throttle response from the Ranger’s 4.0-liter V6 with the development of an all-new Quick Fit Intake System. AIRAID’s easy-to-install system for the 05-07 Ranger takes full advantage of the cool outside air by utilizing the lower portion of the stock air box to significantly enhance air flow to the engine, generating more horsepower and torque. The new intake also provides superior filtration at No Extra Cost since it uses a washable and reusable AIRAID Premium Filter with SynthaFlow® Technology which filters out dirt down to 2 microns. On the dyno, the Ford Ranger Air Intake System generated an additional 6 rear-wheel horsepower and 10 lb/ft of torque.

Airaid 400-194 Intake System

Technorati Tags: , , , , , ,

Category: New Air Intake Systems, New Performance Parts / Tags: , , , , , ,
 
Wordpress Theme by ThemeZee