Tag Archive for Intake Manifolds

Enjoy Outstanding Air Filter Performance with K&N

-All filters are made in the USA or Great Britain
-Superior oil-permeated material blocks dust particles other filters let slip by
-Washable – last filter you will ever need to buy
-Backed by K&N’s famous Million Mile Warranty

Air Can Kill Your Motor!

Along with fuel, oxygen is the lifeblood of your engine. But even the clearest air is filled with trillions of tiny dirt and dust particles. Inferior filters can let millions of them slip through into your engine, where they damage rings, gouge pistons, scar cylinder walls. Every second you drive they’re at work, defacing and destroying your valuable investment, and eventually costing you thousands of dollars in costly, time-consuming repairs.

The Answer: K&N Filters

K&N air filters are designed by a team of crack engineers obsessed with one thing: protecting your car from the havoc that air particles can do to it.
They’ve devoted thousands of man-hours and millions in research dollars to the issue. The result: the latest generation of K&N Filtercharger® Air Filters. They’re unsurpassed in their ability to block damaging pollution from reaching your engine. Yet they allow oxygen to flow through unhampered.

A Filter That Catches Dust Like a Spider Traps Flies

Each K&N filter is crafted from 4 to 6 layers of tough organic material and encased in an aluminum shell. The fibers inside are penetrated through and through with a special grade of oil that bonds with them on an atomic level. Think of this solution as being to dirt and dust like fly paper is to pesky, disease-carrying insects. It reaches out and grabs those millions of particles, holding them fast and trapping them forever, like a spider catching her prey in a web. The result: clean, pure, cold air flowing into your fuel system, free of those microscopic vandals that otherwise would get through to sandblast your engine’s delicate working parts.

So Good It’s Backed by a Million Mile Guarantee

K&N is so confident that their filters are the last you’ll ever need they backed them with a warranty that’s unprecedented. They will cheerfully replace any that fail to hold up for a full million miles of driving. That’s not just talk; that’s backing your words up with action.

We’re Proud to Say Where Our Products Are Made

You should know that every K&N filter is proudly built either in the USA
or in the United Kingdom, by highly trained personnel. Each must pass rigorous quality checks before it’s sent to dealers. You can rest assured that your K&N filter is made by top of the line people, using state of the art equipment.

To Order:

Go to this link.

Technorati Tags: , , , , ,

Professional Products Intake Adapter Kit for FORD 5.4L

Ford’s 5.4L is becoming the performance choice for many performance Mustang builders, replacing the 4.6L engine as the larger displacement provides more power, but without a performance intake manifold the transplant is one step short. Professional Products has introduced a solution with its Professional Products 54110 4.6L to 5.4L Adapter Kit for Ford. This kit allows the installation of Professional Products 4.6L 2-valve Intake Manifold Professional Products 54060 -Satin finish or Professional Products 54061-polished, or any other 4.6L 2V manifold, to the 5.4L engine without additional modifications. The kit includes the two aluminum adapter plates, intake gaskets and all the necessary mounting hardware to help your Mustang breathe free and produce more power.

See PerformanceParts.com for more Professional Products parts.

Technorati Tags: , , , ,

Raw Power For Big-Block Chevys With Edelbrock’s New 20654 RPM Dual-Quad Air-Gap Intake Manifold

Featuring the all-new RPM Air-Gap Dual-Quad intake manifold from Edelbrock – welcome to more horsepower and torque for your big-block Chevy!

Now, it’s easier than ever to update your vehicle’s induction system to a dual quad set-up with these manifold and carburetor kits from Edelbrock. No more choosing different parts, hoping the’ll work together. You get a perfectly matched combination of carburetor and manifold packed into one box. They sparkle in Edelbrock’s ultra-bright “Endurashine” finish. Every kit is complete and bolt-on ready, including two Edelbrock 500cfm Thunder Series AVS carburetors (one manual choke, one electric choke), an Edelbrock RPM Air Gap dual quad intake manifold, Edelbrock’s high tech progressive linkage, a Russell fuel line, a high quality Edelbrock gasket set, and a carburetor stud kit.

EDELBROCK 20654 RPM AIR GAP INTAKE MANIFOLD

For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.

Technorati Tags: , , , , , , , , , , , , , , , , , , , ,

Popular Edelbrock 2096 Top End Kit Available For 383 Chevys

Edelbrock 2096 Top End KitFirst introduced for the small-block Chevy over one year ago, Edelbrock Top End Kits were an instant hit among enthusiasts due to their all-in-one-box convenience and “no guesswork” performance appeal. The concept has been called the Edelbrock Total Power Package® since the 1980’s, but this is the first time Edelbrock has put it all in one box!

Designed specifically for GM’s ZZ383 or similar 1987 & later short block, Power Package Top End Kit #2096 comes complete with an RPM Air-Gap Vortec intake manifold, E-Tec 170 cylinder heads, Performer RPM Hydraulic Roller Cam, timing chain, intake bolts, head bolts and Edelbrock high-quality gaskets.

These kits can be topped off with an Edelbrock Performer® Series or Thunder Series AVS® carb for 460 horsepower from your 383 small-block Chevy engine. There’s no more guesswork about which parts to choose for the best street performance!

EDELBROCK 2096 TOP END KIT

For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.

Technorati Tags: , , , , , , , , , , , , , , , ,

Edelbrock Releases Super Victor Bowtie 2814 For GM Performance Parts Phase 3 Cast Iron Bowtie Heads

Edelbrock 2814 Super Victor BowtieThe highly anticipated release of the Edelbrock Super Victor Bowtie 2814 is finally here, and they’ve done it right! This is the ultimate port-matched single plane race manifold for use with GM Performance Parts Phase 3 Cast Iron Bowtie heads, popular in Circle Track Racing.

Designed specifically for use GM cast-iron Vortec Bowtie cylinder heads #25534421, #25534351,#25534431 or #25534371 on engines needing optimum power from 4000 to 8000 rpm. Featuring raised runners that closely match the port shape and location of these spec series heads, the 2814 is the best choice for racing classes that prohibit modification to the manifold. Edelbrock’s new manifold also features a 6-bolt intake pattern for optimal gasket sealing and 1 inch of additional carb pad height for increased plenum volume.

EDELBROCK 2814 SUPER VICTOR BOWTIE

For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.

Technorati Tags: , , , , , , , , , , , , ,

Weiand 8124 Ford Action Plus™ Manifold For Small Block Fords

Weiand 8124 Action Plus™ Intake ManifoldWeiand is pround to introduce their new Action Plus™ manifold for the small block Ford. Weiand has designed these manifolds with Computational Fluid Dynamics (CFD) to generate maximum torque and horsepower in today’s more efficient engines. Finding additional horsepower is no easy task, and that’s why engineers have carefully designed the runner package and plenum to ensure the air/fuel ratio in each cylinder is consistent. With this manifold, poor distribution is corrected and additional horsepower is gained in the rich, lean cylinders.

The Ford Action Plus™ builds maximum torque for street performance engines and provides exhaust crossover for improved street driving. It is available in satin, polished, and Everbright™ finishes, and is fully machined for a perfect fit. Dyno testing of the Weiand 8124 found an additional 14 peak HP and 13lb/ft torque over a leading brand. Average torque was increased by 9.5 and HP by 8.5 from 2,200 to 6,000 RPM!

WEIAND 8124 FORD ACTION PLUS™ MANIFOLD

For more information, including other Weiand products, click here.

Technorati Tags: , , , , , , , , , , , , ,

Edelbrock 20254 Dual-Quad Carb And Manifold Kit Available for Small Block Chevy

Edelbrock 20254 Air-Gap Dual Quad KitWith the announcement of their dual-quad carb and manifold kits, Edelbrock is making it a snap to get dual-quad performance in one easy kit. These kits include nearly everything you need to install dual-quads on your small-block Chevy with conventional or Vortec-style heads. Also included is the new Edelbrock Dual-Quad Air-Gap intake manifold, intake gasket kit, high-tech progressive linkage, braided fuel line, and a pair of Thunder Series AVS 500 cfm carbs, one with manual choke and one electric choke. The fuel filter and air cleaner are not included. The kits are also available with Edelbrock’s new EnduraShine™ finish on the manifold and carbs for a brilliant maintenance-free shine that won’t fade or discolor.

Edelbrock 20254 Air-Gap Dual Quad Kit
See their complete line of Dual-Quad Carb and Manifold Kits, air cleaners and more.

Technorati Tags: , , , , , , , ,

Professional Products 54060, 54061 TYPHOON 1999-’04 4.6L 2V Ford Mustang

Professional Products 54060Polished Professional Products 54060 - 4.6L Mustang EFI Manifold Polished

Professional Products 54061Satin

Our new Typhoon intake system for the 4.6L Ford Mustang is a really sensational manifold. Developed in conjunction with one of the leading Mustang specialists, this manifold has been chassis dyno proven to produce 21.5 more rear wheel hp than a stock manifold at 6,500 rpm. More torque from 4,000 rpm on up. This manifold features a three piece design that allows easy access to the bottom and the middle of the plenum chamber along with the runners for those who want to do their own additional port and plenum fine tuning. The manifold is a bolt-in replacement for all 1999 to 2004 engines and uses the stock alternator and all other stock engine accessories. Can be used on 1996-’98 engines if 1999 or later heads are used. For additional 4.6L 2-V enhancements that will substantially improve the power and performance…

Technorati Tags: , , , , , , ,

Cleaning Your Edelbrock Aluminum Intake Manifold

Edelbrock has posted a tech tip titled Cleaning Your Edelbrock Aluminum Intake Manifold

Edelbrock Tech Tip:
Cleaning Your Edelbrock Aluminum Intake Manifold

Cleaning Your Edelbrock Aluminum Intake Manifold

While networking with consumers at shows and events, we learn a lot about our customer and what they want from Edelbrock. The old adage, “necessity is the mother of invention” is very true in most cases. This leads us to the question that has incited us to write this Edelbrock Tech Tip feature, “How do you recommend I clean my Edelbrock intake manifold”?Edelbrock intake manifolds are manufactured from a sand cast process utilizing 808 aluminum alloy and have an as-cast wheel-a-brated finish. As-cast is defined as a raw aluminum finish without any protective coating. As-cast aluminum is porous and can absorb under-hood chemicals such as dirt, grease and fuel, resulting in discoloration, rust, or staining. All Edelbrock intake manifolds are as-cast unless offered in our high-luster EnduraShine™ or PermaStar® coated finishes.

Once a porous aluminum finish is stained, it can be very difficult to find an environmentally safe cleaner that will actually extract the blemish from the pores of the aluminum. In our research in finding a safe and effective alternative, Edelbrock has found an aluminum cleaner option that can work effectively, OxiSolv Aluminum Cleaner. It is important to follow OxiSolv’s instructions to prevent damage to other parts on your engine.

Manufactured by OxiSolv, a manufacturer of industrial and commercial cleaning products, OxiSolv Aluminum Cleaner is effective for use in cleaning our as-cast aluminum intake manifolds, cylinder heads, and water-pumps when used as directed. Edelbrock does not sell OxiSolv, however you can visit the following websites for additional product information and locations on where to purchase.

For Detailed OxiSolv Product Information Click Here.

Technorati Tags: , , , , ,